Sleep Operation - Sharp HT-X1 Operation Manual

Sleep operation

HT-X1
You can set the system to the power stand-by mode at the specified
time.
60
1
Play back the desired sound source.
2
Press the SLEEP button and within 8 seconds, press the
ENTER button.
To change the sleep time:
While the sleep time is displayed, press the
(Maximum: 3 hours - Minimum: 5 minutes)
3
Within 30 seconds, press the ENTER button.
4
The system will enter the power stand-by mode automati-
cally after the preset time has elapsed.
The volume will be turned down 30 seconds before the sleep
operation finishes.
To confirm the remaining sleep time:
Press the SLEEP button while the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
To cancel the sleep operation:
Press the ON/STAND-BY button while the sleep timer is set.
or button.