Changing The Default Setting Of The Amplifier - Sharp HT-X1 Operation Manual

Changing the default setting of the amplifier (continued)
HT-X1
" Speaker level setting
If sounds from the speakers are uneven, you can equalize them by
adjusting the speaker levels.
1
Press the SET UP AMP button.
2
Within 10 seconds, press the
button to select "SP LEVEL",
and then press the ENTER button.
3
Within 10 seconds, press the
button to select the desired
speaker.
The indicator of the selected speaker
flashes.
4
Within 10 seconds, press the
button to adjust the level.
! You can adjust the level at 1 dB in-
tervals.
! To set the level of other speakers,
repeat the operation from step 3.
5
Press the RETURN
The setting is complete.
Notes:
! The speaker level setting is only available for the front speakers
and subwoofer/amplifier unit when the surround is "STEREO" or
"VIRTUAL (SURROUND)".
! If subwoofer/amplifier unit sound is distorted, lower the
subwoofer/amplifier unit level.
54
or
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select ENTER Enter Return
or
Speaker Level
Front L 0 dB
Center 0 dB
Front R 0 dB
Surround R 0 dB
Surround L 0 dB
Sub Woofer 0 dB
Select Change Return
or
Speaker Level
Front L 0 dB
Center 0 dB
Front R 0 dB
Surround R +3 dB
Surround L 0 dB
Sub Woofer 0 dB
Select Change Return
button twice.
" Test tone
You can check each speaker sound by a test tone. Readjust the vol-
ume set in "Speaker level setting".
1
Press the SET UP AMP button.
2
Within 10 seconds, press the
button to select "TONE", and
press the ENTER button.
The test tone will be heard from each speaker in order, at about
2-second intervals.
Test Tone
Front L
Center
Front R
Surround R
Surround L
Sub Woofer
Select Change
To adjust speaker levels
While the test tone is heard:
Adjust the level with the or
Press the or to select a speaker.
3
Press the RETURN button twice.
The setting is complete.
Note:
The test tone is produced only from the front speakers and
subwoofer/amplifier unit when the surround is "STEREO" or "VIR-
TUAL (SURROUND)".
or
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select Enter Return
ENTER
0 dB
0 dB
0 dB
+3 dB
0 dB
0 dB
Return
button.