Sharp HT-X1 Operation Manual page 56

Changing the initial setting of DVD (continued)
HT-X1
Setting Selectable parameters
(* indicates initial settings.)
Lan- OSD Lan-
guage guage
Setup
Audio
Subtitle
Disc menu
Video TV screen
Setup
TV type
Video output Interlace*
56
English* A language for screen display can be set, such as for initial settings or messages.
Français
Español
English* A language for audio can be set.
You can specify a language for conversation and narration.
Other
English* A language for subtitle can be set.
The subtitles are displayed in a specified language.
Other
Off
English* A language for disc menus can be set.
Menu screens are displayed in a specified language.
Other
4:3 PS The screen mode should be set according to the connected TV type.
4:3 LB*
4:3 PS When playing a wide image (16:9) disc, the left and right sides of the image
16:9
are cut (pan scan) to display a natural-looking 4:3 size image.
A 4:3 disc is played in 4:3.
4:3 LB When playing a wide image (16:9) disc, black bands are inserted at the top
and bottom and you can enjoy full wide images (16:9) on a 4:3 size TV.
A 4:3 disc is played in 4:3.
16:9 A wide image (16:9) is displayed when playing a wide image (16:9) disc.
! When playing a 4:3 image disc, the image size depends on the setting
of the connected TV.
! If you play back a wide image (16:9) disc with the main unit connected
to a 4:3 TV, images appear stretched vertically.
NTSC* Selects the correct color system (TV standard).
Auto
NTSC: Select this mode for the NTSC TV.
Auto: Select this mode for the multi-system TV.
The video output mode should be set according to the connected TV type.
Progressive
Interlace: Select this for a non-progressive scan TV (use a video cable, S-vid-
eo cable, or component video cable).
Progressive: Select this for a progressive scan TV (use a component video cable).
Description Refer-
ence
page
P. 22