Chapter 1. General Description; Safety Precaution For Service Manual; Important Service Notes (For U.k. Only); Specifications - Sharp HT-SL50 Service Manual

Sound bar home theater system
Hide thumbs Also See for HT-SL50:
Table of Contents

Advertisement

CHAPTER 1: GENERAL DESCRIPTION

[1] Safety Precaution For Service Manual

WARNING
This unit contains no user serviceable parts. Never remove covers unless qualified to do so.
This unit contains dangerous voltages, always remove mains plug from the socket before any service
operation and when not in use for a long period.

[2] Important Service Notes (for U.K. only)

Before returning the unit to the customer after completion of a repair or adjustment it is necessary for the following withstand voltage test to be
applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
Withstanding Voltage Tester
Test voltage
Set time
Set current (Cutoff current)
Unit
Judgment
OK: The "GOOD" lamp lights.
NG: The "NG" lamp lights and the buzzer sounds.
[3]

Specifications

General
Power source AC 220 - 240 V ~ 50/60 Hz
Power
Power On: 25 W
consumption
Power Stand-by: Below 1 W
Output power RMS: Total 100 watts
RMS:
Front Left/Right:
RMS: 50W (25W + 25W) (10% T.H.D.)
RMS: 48W (24W + 24W) (1% T.H.D.)
Subwoofer:
RMS: 50W (10% T.H.D.)
RMS: 50W (1% T.H.D.)
HDMI™ (with Audio Return Channel)
Output
output: (audio/video support to 1080p)
terminal
x 1
Input
Analogue input (Audio in):
terminal
Stereo mini socket Ø 3.5 mm
HDMI input: (audio/video support to
1080p) x 1
set value
4,240 VPEAK
3,000 VRMS
6 secs
4 mA
1 – 1
WITHSTANDING
VOLTAGE TESTER
AC
OUT
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
Soundbar speaker
Type
Full Range speaker system
2.2 x 11.5 cm (7/8" x 4-1/2")
Full Range
Maximum
50 W/CH
input power
Rated input
25 W/CH
power
Impedance
4 ohms/CH (3 pieces parallel)
Dimensions
Width: 801 mm (31-1/2")
Height: 26 mm (1-1/16")
Depth: 50 mm (2")
Weight
0.66 kg (1.46 lbs.)
Subwoofer
Type
Subwoofer system
16 cm (6 - 5/16") woofer
Maximum
100 W
input power
Rated input
50 W
power
Impedance
8 ohms
Dimensions
Width: 115 mm (4 - 1/2")
Height: 422 mm (16 - 5/8")
Depth: 307 mm (12 - 1/16")
Weight
4.50 kg (9.92 lbs.)
–2
HT-SL50
PROBE
UNIT
CONNECT THE PROBE
TO SHELL OF AUDIO LINE IN

Advertisement

Table of Contents
loading

Table of Contents