10.3 Extension Pole Installation
The Extension Pole Installation method can be found in document 667/CI/47240/ETC.
Figure 47 : Extension Kit Assembly Instructions (667/CI/47240/ETC)
The kit 667/1/47225/X00 (0 = grey, 1 = black) should be used to attach the extension pole
to the signal pole.
10.4 Connecting the Access Point
The access point must interface to the WiMag communications rack/WiMag Loop
Detector Replacement Card. This information is covered in sections 12, 13 and 14.
Version
11
Last Editor
Jeerh, Manpreet
Document
WIMAG GENERAL HANDBOOK
Name
Copyright © Siemens Mobility Limited 2012. All Rights Reserved.
Page 64 of 117
Status
Date
Doc. No.
Siemens Mobility Limited
Sopers Lane, Poole, Dorset
BH17 7ER
Issued
March 2020
667/HB/47200/000