User Manual
A9000
AC Power Source
Figure 2.3.2.3 380Vac 3 phase 5 wires Y Input Connection (for DME-A902ABT B)
2.4 Output Connection
2.4.1 Output connection
Output connection is different for single phase or three phase output, choose the correct
one before connecting. Connect the load wire to "COM" and "φ1/φ2/φ3 " terminal as Fig.
2.5.1,2.5.2 show. To meet the safety requirements the wires to the load must use gauges
large enough to prevent from overheating while carrying the output current.
12
│ www.deltaww.com
Figure 2.3.2.4 380V Input terminal