Delta A9000 User Manual page 110

User Manual
A9000
AC Power Source
:DVOLtage
:AC
:FREQuency
:DFRequency
mode.
:SPHase
:DWELl
:COUNt
SYNThesis
DST30、DST31available
:AMPLitude
waveforms.
:PHASe
TRIG
= FIXE
NPHase
VERion:DSP
VERion:LCM
VERion:UI
INSTrument:NSELect
SYSTem:ERRor
:1?
:2?
:3?
107 │ www.deltaww.com
Set (query) voltage change for each step in STEP mode
Set(query) start frequency for STEP mode.
Set(query) frequency change for each step in STEP
Set(query) start phase angle at STEP mode.
Set(query) output duration for each step in STEP.
Set(query) how many steps to execute STEP mode.
Set(query) which synthesis waveform to use. There are
Set (query) voltage amplitude for each order of harmonic
Set (query) phase for each order of harmonic waveforms.
Set (query) trigger status. Disabled when OUTPut:MODE
Set(query) output mode:
Query firmware version.
Query firmware version used for LCM.
Query firmware version for UI.
Set specific output phase to responce queries
Query error status, must be used together with
Query Φ1 error status
Query Φ1 error status
Query Φ1 error status