Samson 3730 Series Mounting And Operating Instructions page 110

Start-up and configuration
Deactivate travel limit:
1. Turn until Code 11 appears.
2. Press , the code number 11 blinks.
3. Turn until No appears.
4. Press to deactivate the travel limit func-
tion.
Change pressure limit and control parameters:
Note
Do not change the pressure limit (Code 16). Only change the control parameters K
17) and T (Code 18) if the settings of the replaced positioner are known.
V
1. Turn until the required Code 16/17/18
appears.
2. Press , the code number 16/17/18
blinks.
3. Turn to set the control parameter select-
ed.
4. Press to confirm.
7-14
Travel limitation
Default: No
(Code
P
Pressure limit
Default: No
K level
P
Default: 7
T level
V
Default: 2
EB 8384-3 EN