Samson 3730 Series Mounting And Operating Instructions page 109

1. Turn until Code 3 appears (reading:
No).
2. Press , the code number 3 blinks.
3. Turn until YES appears.
4. Press to confirm (reading: ).
Enter the pin position and nominal range:
1. Turn until Code 4 appears.
2. Press , the code number 4 blinks.
3. Turn to select pin position on lever (see
relevant section on attachment).
4. Press to confirm.
5. Turn until Code 5 appears.
6. Press , the code number 5 blinks.
7. Turn and set rated travel of the valve.
8. Press to confirm.
Select the initialization mode:
1. Turn until Code 6 appears.
2. Press , the code number 6 blinks.
3. Turn until SUb appears.
4. Press to confirm the SUb initialization
mode.
Enter the direction of action:
1. Turn until Code 7 appears.
2. Press , the code number 7 blinks.
3. Turn to select the direction of action
(ää/äæ).
4. Press to confirm.
EB 8384-3 EN
Start-up and configuration
Enable configuration
Default: No
Pin position
Default: No
mm
Nominal range
(locked when Code 4 =
No)
mm
Init mode
Default: MAX
Direction of action
Default: 
7-13