Circuit breaker protection
The motor may stop running when the circuit breaker protection is activated to prevent overload of motor.
If the motor stops, please take the following steps:
1
Switch off the power.
Press the "O" (OFF) button.
●
2
Press the "R" (REVERSE) button to allow reverse
operation for several seconds.
3
Switch off the power and remove ingredients from
attachments.
4
Press the "I" (ON) button.
Reduce the amount of ingredients being fed in and push them gently into
●
the small/large feed inlet.
Replacement Parts
Juice cone
■
Part number:
JD33-163-K0
Pulp container
■
Part number:
JD36-153-K1
Juice container
■
Part number:
JD05-163-K1
Specifications
Power supply
Power consumption
Operation rating
Dimensions (W × D × H) (approx.)
Mass (approx.)
Length of the mains lead (approx.)
Airborne Acoustical Noise
Gasket
■
Part number:
JD27-153
Rotating brush
■
Part number:
JD35-153-K0
2 consecutive cycles of 15 min. ON,
Frozen cone
■
Part number:
JD38-163-A0
Rubber brush
■
Part number:
JD34-163
220 - 240 V
50 - 60 Hz
150 W
then 30 min. OFF
19 × 20.5 × 42.5 cm
4.0 k g
1.0 m
63 dB(A) (ref 1 pW)
GB23