Before Use
1
Set the juicing bowl on the motor housing.
Align the "" mark on the motor housing and the "" on
the juicing bowl.
2
Attach the rotating brush and juice
cone, then set it on the juicing bowl.
Align ① and ② .
3
Mount the squeezing screw.
① Insert the squeezing screw into the centre.
② Rotate the squeezing screw and push it into the
hole until it stops.
The lid cannot be closed if the squeezing screw is
●
notpusheddownsufficiently.
Becarefulnottogetyourfingerclampedinthe
●
gap between the squeezing screw and the juice
cone.
GB14
(Continued)
To assemble the attachments
(Frozen cone)