Advertisement
DISASSEMBLY
1
1 Release the Clamps.
2
Note: If difficult to wash the Container Unit, it can be detached.
A
1 Pull upper part A
of the Rotatable
Container until the
hook part B is as
illustrated.
CIRCUIT BREAKER PROTECTION
When the Circuit Breaker automatically stops the motor due to overloading, follow the directions
below.
1. Turn off the Switch to " 0 / O " position, (refer to page 5).
2. Remove accumulated food residue from the Spinner and the Container Cover. Then cut ingredients
into smaller pieces.
3. Attach parts again (refer to page 7) and resume operation. Push them gently into the Feeding Tube
using the Food Pusher.
6
1
1 Lift up the Container
Unit.
B
2 Press the hook part B as
illustrated and pull upwards
to detach it.
2
2
3
3
2
1
Part C
B
3 To attach the Container Unit
again by insert part C first
thus reversing steps 1 to 2.
2 Lift up the Container
Cover and the Food
Pusher.
3 Detach the Pulp
Container.
1 Lift up the Spinner.
2 Remove the Spinner
Pad.
Part C
Advertisement
