Disassembly; Circuit Breaker Protection - Panasonic MJ-DJ01SSL Operating Instructions Manual

DISASSEMBLY

1
1 Release the Clamps.
2
Note: If difficult to wash the Container Unit, it can be detached.
A
B

CIRCUIT BREAKER PROTECTION

When the Circuit Breaker automatically stops the motor due to overloading, follow the directions
below.
1. Turn off the Switch to " 0 / O " position, (refer to Page 5).
2. Remove food residue from the Spinner and cut ingredients into smaller pieces.
3. Attach parts again (refer to Page 7) and resume operation. Push them gently into the Feeding Tube
using the Food Pusher.
6
1 Lift up the Container
Unit.
1 Lift up the Container
Cover and the Food
Pusher.
2 Detach the Pulp
Container.
3
2 Remove the Spinner
Pad.
1 Lift up the Spinner.
1 Pull upper part A of the
Rotatable Container until
the hook part B is as
illustrated.
2 Press the hook part B as
illustrated and pull upwards
to detach it.
3 To attach the Container Unit
again by reversing steps 1
to 2.