Circuit Breaker Protection; Safety Lock - Panasonic MJ-H100 Operating Instructions Manual

CIRCUIT BREAKER PROTECTION

When the Circuit Breaker automatically stops the motor due to overloading, follow the directions
below.
1. Switch OFF to reset the Circuit Breaker.
2. Remove accumulated food residue from the Spinner and the Container Cover. Then cut the
ingredients into smaller pieces.
3. Attach parts again(refer to page 7) and resume operation. Push them gently into Feeding Tube using
the Food Pusher.
4. If it still does not start, reset the Circuit Breaker by switching OFF again, then resume the operation.
Do not continuously reset for too many times.

SAFETY LOCK

The Safety Lock has been designed to prevent the Juicer from switching ON when the Container
Unit is not properly in place.
Note:
• Do not push the Safety Pin and Safety Lever with any instrument, stick etc.
• Do not pour liquids or ingredient at the Safety Pin area and switch area.
• Keep the Safety Pin area clean to avoid foreign particles accumulate on the area.
The above actions will ensure the Safety Lock movement to function smoothly otherwise it will
damage the parts related to the Safety Lock.
6
Container Pin
Juicer Pin