Table of Contents
Advertisement
4.
To remove the hard drive connector, pull the connector (3) away from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
WLAN module
To remove the WLAN module, use this procedure and illustration.
Table 5-5
WLAN module descriptions and part numbers
Description
Dual antenna
Realtek 8852BE Wi-Fi 6 Bluetooth 5.2 WLAN
Realtek RTL8822BE 802.11ac 2 × 2 Wi-Fi + BT 5.0 Combo Adapter (MU-MIMO supported)
Single antenna
Realtek RTL8821CE 802.11b/g/n/a/ac (1 × 1) MU-MIMO supported and Bluetooth 4.2 combo
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact support.
Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the rubber feet (see
To prevent an unresponsive system, replace the wireless module only with a wireless module
Computer feet on page
Preparation for disassembly on page
32).
Spare part number
M91238-005
L44796-005
M09870-005
32).
WLAN module
37
Advertisement
Table of Contents
