4.
Lift the system board out of the computer (3).
Reverse this procedure to install the system board.
Heat sink assembly
To remove the heat sink assembly, use this procedure and illustration.
Table 5-15
Heat sink assembly description and part number
Description
Heat sink
Before removing the heat sink assembly, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
Remove the heat sink assembly:
1.
In the order indicated on the heat sink, remove the four Phillips M2.0 × 2.8 screws (1) that secure the
heat sink to the system board.
Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page
35).
32).
33).
Spare part number
L96692-001
32).
Heat sink assembly
49