Cutouts For Lateral Cable Entries - Siemens SICHARGE UC 150 Operating Instructions Manual

5.2

Cutouts for lateral cable entries

When cables are run through the sides of the charging unit, cable cutouts must be punched into the side panels (article number).
Aluminum plate (left)
a
Aluminum plate (right)
s
Figure 5-1 SICHARGE side view
To remove the aluminum plates, remove the M5 bolts (6 locations on each cover) that fasten the cover to the cabinet bottom.
The plates should then be modified to punch the holes for incoming and outgoing cables to a suitable size. We recommend
using compression connectors at the drilled holes to fasten the cables; however, the edges should have protection to prevent
damaging the cables during installation.
Aluminum plate
a
Figure 5-2 Removable aluminum cover
Operating Instructions | SICHARGE
33