Operation
Turning the UPS Off
To turn off the UPS, press and hold the Off
beep ceases (approximately five seconds). The
flash and the UPS remains in Standby mode until you unplug the UPS
from the power outlet.
Initiating the Self-Test
NOTE The batteries must be fully charged to perform the self-test.
Press and hold the
During the test, individual indicators illuminate as various parts of the
UPS are checked. If the alarm beeps or a UPS alarm indicator stays on,
see Table 9 on page 44.
28
button for three seconds to initiate the self-test.
Powerware
5125 Tower (1000–2200 VA) User's Guide
®
button until the long
µ
i ndicator begins to
Rev B www.powerware.com
S