Operation
Normal Mode
During Normal mode, the
displays the percentage of UPS load capacity being used by the protected
equipment (see Figure 12). The UPS monitors and charges the batteries
as needed and provides power protection to your equipment.
When all of the bar graph indicators and the
illuminated, power requirements exceed UPS capacity; see page 45 for
more information.
Buck and Double Boost Mode
With the Buck and Double Boost feature, the UPS accepts a wide input
voltage range (-30%/+20% of nominal) and provides consistent, clean
voltage to your equipment. The UPS operates normally from utility
power and alerts you of the voltage fluctuations. The
alternates between green and red while in Buck, Single Boost, or Double
Boost mode as shown in Figure 13.
26
µ
i ndicator illuminates and the front panel
Figure 12. Load Level Indicators
Figure 13. Buck and Double Boost Indicators
Powerware
5125 Tower (1000–2200 VA) User's Guide
®
>100%
76–100%
51–75%
26–50%
0–25%
indicator are
µ
i ndicator
Buck Mode
Single Boost Mode
Double Boost Mode
Rev B www.powerware.com
S