Installing The Optional Front Bezel - Dell PowerEdge R630 Owner's Manual

Figure 17. Removing the Quick Sync bezel
a. bezel lock
b. Quick Sync bezel
Related references
Safety instructions
Related tasks

Installing the optional front bezel

Installing the optional front bezel
Follow the safety guidelines listed in the Safety instructions section.
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2. Hook the right end of the bezel onto the chassis.
3. Fit the free end of the bezel onto the system.
4. Lock the bezel by using the key.
72 Installing and removing system components