Dell PowerEdge R630 Owner's Manual page 53

Related references
System Information
System Information details
Related tasks
Viewing System Information
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions,
such as memory testing and node interleaving.
Related references
Memory Settings details
System BIOS
Related tasks
Viewing Memory Settings
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
Related references
Memory Settings
Memory Settings details
Memory Settings details
The Memory Settings screen details are explained as follows:
Option Description
System Memory Specifies the memory size in the system.
Size
System Memory Specifies the type of memory installed in the system.
Type
System Memory Specifies the memory speed.
Speed
System Memory Specifies the memory voltage.
Voltage
Video Memory Specifies the amount of video memory.
Pre-operating system management applications 53