Installing The Optional Front Bezel; System Cover; Removing The System Cover - Dell PowerEdge R530 Owner's Manual

Installing the optional front bezel

Prerequisite
Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2 Hook the right end of the bezel onto the chassis.
3 Fit the free end of the bezel onto the system.
4 Lock the bezel by using the key.
Figure 13. Installing the optional front bezel
1 bezel lock

System cover

The system cover protects the components inside the system and helps in maintaining air flow inside the system. Removing the system
cover actuates the intrusion switch which aids in maintaining system security.

Removing the system cover

Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 If installed, remove the optional bezel. For more information, see the Removing the optional front bezel section.
64 Installing and removing system components
2 front bezel