Dell PowerEdge R630 Owner's Manual page 59

Option Description
Option
Model
Drive Type
Capacity
Related references
SATA Settings
Related tasks
Viewing SATA Settings
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video
controller, integrated RAID controller, and the USB ports.
Related references
System BIOS
Related tasks
Integrated Devices details
Viewing Integrated Devices
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Integrated Devices.
Related references
Integrated Devices
Related tasks
Integrated Devices details
Integrated Devices details
The Integrated Devices screen details are explained as follows:
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Pre-operating system management applications 59