Device Settings; Dell Lifecycle Controller - Dell PowerEdge R630 Owner's Manual

Related concepts

Device Settings

Related references
System BIOS
Related tasks
Entering the iDRAC Settings utility
Changing the thermal settings
Entering the iDRAC Settings utility
1. Turn on or restart the managed system.
2. Press F2 during Power-on Self-test (POST).
3. On the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.
Related references
iDRAC Settings utility
Changing the thermal settings
The iDRAC settings utility enables you to select and customize the thermal control settings for your system.
1. Click iDRAC Settings > Thermal.
2. Under SYSTEM THERMAL PROFILE > Thermal Profile, select one of the following options:
● Default Thermal Profile Settings
● Maximum Performance (Performance Optimized)
● Minimum Power (Performance per Watt Optimized)
3. Under USER COOLING OPTIONS, set the Fan Speed Offset, Minimum Fan Speed, and Custom Minimum Fan Speed.
4. Click Back > Finish > Yes.
Related references
iDRAC Settings utility
Device Settings
Device Settings enables you to configure device parameters.
Related references
System BIOS

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) provides advanced embedded system management capabilities including system deployment,
configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell EMC
system embedded Unified Extensible Firmware Interface (UEFI) applications.
Related references
Embedded systems management
66 Pre-operating system management applications