1.3 Features
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard
◆
2 4-Port 10/100Mbps Fast Ethernet Switch
◆
2 -Port Gigabit TP/SFP combo ports
◆
12-Port PoE( FGSW-2612PVS) and 24-Port PoE( FGSW-2620PVS)
◆
Each Switching ports support auto-negotiation-10/20, 100/200Mbps supported
◆
Supports IEEE 802.3af 15.4 watts power output on each port
◆
Auto-MDI/MDI-X detection on each RJ-45 port
◆
Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex)
◆
H igh performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous
◆
packets to optimize the network bandwidth
8 K MAC address table, automatic source address learning and ageing
◆
5 12K Bytes packet buffers
◆
Web interface for Switch basic management and setup
◆
Support up to 26 port-based VLAN groups
◆
Support up to 7 Trunk groups, each trunk for up to maximum 8 port with 800Mbps bandwidth
◆
Port mirroring allows monitoring of the traffic across any port in real time
◆
Support QoS and bandwidth control on each port
◆
Supports Access Control List function
◆
19-inch rack mount size
◆
Internal full-range power supply suitable for worldwide use
◆
EMI standards comply with FCC, CE class A
◆
1.4 Specification
Product
Hardware Specification
Ports
Module Slots
PoE ports
Switch Processing Scheme
Throughput (packet per second)
Switch fabric
Address Table
Share data Buffer
Flow Control
Dimensions
Weight
Power Requirement
Power Consumption /
Dissipation
FGSW-2620PVS
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
2 Gigabit TP/SFP combo ports
24( port 1 to port 24)
Store-and-forward
6.547Mpps
8.8Gbps
8K entries
512K Bytes
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
440 x 265 x 44 mm, 1U height
3.87kg
100~240V AC, 50-60 Hz
13.5 Watts maximum / 46 BTU/hr maximum
FGSW-2612PVS
12( port 1 to port 12)
3.51kg
- 5 -