Hardware Description; Front Panel - Planet FGSW-2612PVS User Manual

This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same Web Smart PoE
Switch and automatically distinguishes the speed of incoming connection.
This section describes the hardware features of Web Smart PoE Switch. For easier management and control of the Web
Smart PoE Switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display
the unit LED indicators. Before connecting any network device to the Web Smart PoE Switch, read this chapter carefully.

2.1 Front Panel

The Front Panel of the Web Smart PoE Switch consists of 24x Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports, the Web
Smart PoE Switch provides 2 Gigabit TP/SFP combo ports either can be 1000Base-T for 10/100/1000Mbps or
1000Base-SX/LX through SFP (Small Factor Pluggable) interface.
The LED Indicators are also located on the front panel of the Web Smart PoE Switch.
2.1.1 LED indicators
System
LED Color
PWR Green
Per 10/100Mbps port
LED Color
LNK/ACT Green
100 Orange Lights to indicate the port is running in 100Mbps speed.
Per PoE port
LED Color
PoE In-use Green
Per 10/100/1000Base-T port /SFP interfaces
LED Color
LNK/ACT
Green
1000
LNK/ACT
Green
100
FDX Green
Figure 2-1: FGSW-2620PVS Switch front panel
Figure 2-2: FGSW-2612PVS Switch front panel
Lights to indicate that the Switch has power.
Lights to indicate the link through that port is successfully established.
Light: indicate the port is providing 15.4 watts power output to remote Powered Device.
Lit: indicate that the port is operating at 1000Mbps.
Off: indicate that the port is operating at 10Mbps or 100Mbps.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lit: indicate that the port is operating at 100Mbps.
Off: indicate that the port is operating at 10Mbps or 1000Mbps.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lit: indicate that the port is operating at full-duplex mode.
Off: indicate that the port is operating at half-duplex mode.

2. HARDWARE DESCRIPTION

Function
Function
Function
Function
- 7 -