Access Control List; Acces Control List - Planet FGSW-2612PVS User Manual

4-9 Access Control List

The Access Control List (ACL) is a concept in
determining the appropriate
request, principally the process's
for a system resource by listing the identities of the system entities that are permitted or denied to access the resource. The
screen in following screen appears; table 4-5 describes the Access Control List objects of Web Smart PoE Switch.
Object Description
Group id Input a group ID and available range is 1-255.
Action To assign "Permit" or "Deny" for Access Control List, the screen in
To choose VLAN type as "Any" or by "VID (1-4094)", the screen in
VLAN
To choose Packet type as "IPv4" or by "Non-IPv4", the screen in
Packet Type
To decide to "check" or "Uncheck" the IP fragment, the screen in
IP Fragment
Provide additional L4 protocol for security on Layer 4 level, the screen in
L4 Protocol
appears.
Display "IPv4" or "Non-IPv4" ACL groups, maximum up to 16 groups and the screen in
Current List
appears.
Add button Press this button for add Access Control List group on Web Smart PoE Switch, the screen in
4-42 & 4-43
Del button Press this button for delete Access Control List group on Web Smart PoE Switch, the screen in
Figure 4-44 to 4-49
Table 4-5 Descriptions of the Access Control List (ACL) screen Objects
computer security
access rights to a given object depending on certain aspects of the
user identifier. Access Control List (ACL) is a mechanism that implements access control
Figure 4-35 Access Control List (ACL) Web Page screen
appears.
appears.
used to enforce privilege separation. It is a means of
Figure 4-36
Figure 4-37
Figure 4-37
Figure 4-38
Figure 4-39 & 4-40 & 4-41
process that is making the
appears.
appears.
appears.
appears.
Figure 4-43
Figure
- 33 -