Object
Description
Port
Indicate port 1 to port 26.
Enable
Per port Disable or Enable on Web Smart PoE Switch.
Auto
Per port Disable (Off) or enable (On) Auto negotiation on Web Smart PoE Switch.
Adjust per port speed duplex mode on Web Smart PoE Switch; the available options are Auto, 100F,
Spd/Dpx
100H, 10F, 10H. Default mode is Auto.
Flow Control Per port Flow control Disable (Off) or enable (On) on Web Smart PoE Switch. Default mode is On.
Input the value of packet rate sent from the connected port to this port must enable the flow control
InRate
feature of this port for the function to work normally. The available value ranges from 1 to 99 and rate
unit: 1Mbps.
Input the value of packet rate sent from this port to the connected port. The available value ranges
OutRate
from 1 to 99 and rate unit: 1Mbps.
Apply button Press this button for save current configuration of each port on Web Smart PoE Switch.
Figure 4-5 Port Configuration Web Page screen
Table 4-2 Descriptions of the Port Configuration screen Objects
- 15 -