Canon LBP673Cdw Important Safety Instructions Manual page 4

uninterruptible power supply. Doing so may result in
En
a malfunction or fault if a power failure occurs.
• Do not connect the power cord to the auxiliary
Fr
power outlet on a computer.
• We recommend using a power outlet wired via a
De household earth-leakage circuit breaker.
• Electrical noise may cause this machine to
malfunction or lose data.
It
• When reconnecting the power cord after
disconnecting it, wait at least 5 seconds before
Es
reconnection.
• A voltage drop that exceeds the permitted range
Ca
may result in a malfunction or loss of data in the
machine and any connected computers.
• For information on your power supply, contact your
Eu
power supplier or your local electrical appliances
store.
Pt
Handling
El
WARNING
Da
Observe the following
Improper handling may lead to a fire, electric shock or
Nl
burns.
• If the machine makes an unusual noise, emits an
No
unusual smell, emits smoke or excessive heat, or if
any parts are damaged, immediately unplug the
Sv
machine from the power outlet and contact your
dealer or service representative.
• Do not disassemble or modify this machine.
Fi
• Place the machine such that the power cord and
other cables and the gears and electrical parts inside
Ru
the machine are well out of the reach of children.
• Do not place jewelry or other metal objects or
Uk
containers filled with liquid on the machine.
• Do not use flammable sprays near this machine.
• When moving this machine, always turn the
Lv
machine off at the power switch, unplug the
machine from the power outlet and then disconnect
Lt
the power cord and interface cables.
• When connecting or disconnecting a USB cable
Et
while the machine is still plugged into a power
outlet, do not touch the metal part of the connector.
Pl
• Do not connect unapproved products to ports on
this machine (power outlet, connector ports, etc.).
• When installing or removing optional products,
Cs
always turn this machine off at the power switch,
unplug the machine from the power outlet and then
Sk
disconnect the power cord and interface cables.
Cleaning and maintaining this machine
Sl
Improper cleaning may result in machine malfunctions,
fire, electric shock or static electricity.
Hr
• You should clean this machine regularly.
• Before cleaning, always turn the machine off and
Hu
unplug it from the power outlet.
• Unplug the power plug periodically and wipe the
machine with a dry cloth to remove dust and grime.
Ro
• Clean the machine using a cloth moistened with
water and then thoroughly wrung out. Do not use
Bg
alcohol, benzene, paint thinners or other flammable
substances and do not use tissue paper or paper
Tr
towels.
• Regularly check the machine for overheating,
Ar rusting, dents, scratches and cracks.
Users of cardiac pacemakers
Fa
This machine and its toner cartridges emit low levels of
magnetism and ultrasonic waves. If you use a cardiac
pacemaker and experience any abnormalities, move
away from the machine and consult your physician.
CAUTION
Do not attempt to carry the machine with the paper
drawers or optional products (paper feeder)
installed
Doing so risks parts being dropped and causing injury.
Observe the following
Failure to do so may result in injury, faults or paper jams.
• Do not place heavy objects on this machine.
• Take care not to trap your hands when using parts
that open and close.
• To avoid your hands or fingers being trapped, do not
touch the paper eject rollers.
• Take care to avoid cutting your hands or fingers on
paper or machine parts when replenishing the paper
or clearing paper jams.
• Do not subject the machine to strong impacts or
shaking.
• Do not use undue force when opening and closing
doors, covers or drawers, etc. on the machine.
• Do not turn this machine off while it is printing.
• Do not open and close any covers, or remove or add
paper while the machine is running.
• Do not put your hands inside the machine unless
absolutely necessary.
Move or re-install the machine as instructed in the
User's Guide
When relocating or re-installing a previously installed
machine, do so in accordance with the instructions in
the User's Guide.
Do not put your hand into the machine while the
paper drawers are removed (only for machines with
paper drawers installed)
Doing so may result in injury.
Do not touch high-temperature or high-voltage
components
Doing so may result in burns or other injury.
• Do not touch parts of the machine other than those
specified in the manual.
• Immediately after use, the inside of the machine and
the paper eject slots are hot and should not be
touched.
• Printed paper may become hot during continuous
printing and should be handled with care.
4
Standard / regulation
Product name
In some sales regions, this product may be registered
under the names in parentheses ( ) below in accordance
with local safety regulations.
LBP673Cdw (F810200)
Wireless LAN Regulatory Information
Regulatory information for users in Russia
Подтверждение соответствия Минкомсвязи России:
Декларация соответствия № Д-МДРД-5398 от
28.05.2018 года, действительна до 28.05.2024 года,
зарегистрирована в Федеральном агентстве связи
07.06.2018
Regulatory information for users in UAE
LBP673Cdw includes approved Wireless LAN Module
(Model name: AW-NM333).
TRA
REGISTERED No: ER63428/18
DEALER No: DA0060877/11
EMC requirements of EU Directive
This equipment conforms with the essential EMC
requirements of EU Directive. We declare that this
product conforms with the EMC requirements of EU
Directive at nominal mains input 230 V, 50 Hz, although
the rated input of the product is 220 to 240 V, 50/60 Hz.
Use of Shielded cable is necessary to comply with the
technical EMC requirements of EU Directive.
EU WEEE and Battery Directives
WEEE and Battery Directives information is available in the
latest User's Guide (HTML manual), which can be viewed
on the Canon website (https://oip.manual.canon/).
UK WEEE and Battery Directives
These symbols indicate that this product is not to be
disposed of with your household waste, according to
the UK Waste Electrical and Electronic Equipment
Regulations and the UK Batteries and Accumulators
Regulations.
If a chemical symbol is printed beneath the symbol
shown above, in accordance with the UK Batteries and
Accumulators Regulations, this indicates that a heavy
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is
present in this battery or accumulator at a concentration
above an applicable threshold specified in the UK
Batteries and Accumulators Regulations.
This product should be handed over to a designated
collection point, e.g., on an authorized one-for-one basis
when you buy a new similar product or to an authorized
collection site for recycling waste electrical and
electronic equipment (EEE) and batteries and