Shindaiwa DG60MI Owner's And Operator's Manual page 16

○ Generator
Status Screen
Generator Voltage (ph-N)
Generator Voltage (ph-ph)
Generator Frequency
Generator Current (A)
Generator Earth Current (A)
Generator Load Ph-N
(kW)(%)
Generator Total Load
(kW)(%)
Generator Load Ph-N (kVA)
Generator Total Load
(kVA)(%)
Generator Power Factor
Generator Load ph-N (kvar)
Generator Total Load (kvar)
Generator Load (kWh, kVAh,
kvarh)
Gen Phase Sequence
Active Config
○ Mains
Status Screen
Mains Voltage
Mains Frequency
Mains Phase Sequence
Active Config
○ Alarms
If an error occurs during operation, the Operation Display automatically switches to the
Alarm screen, and displays error details. Refer to "9-4.Protective Functions" for details
of main errors.
When the Stop Mode Button is pressed after the error is cleared, the alarm display
disappears.
< Note>
 Even if the earth leakage relay operates and the breaker is turned off, nothing is displayed on
the Alarm screen.
○ Event Log
Displays the operation history of this generator. This Event Log records up to 250 items.
When EventLog exceeds 250 items, the oldest history is overwritten.
○ Communications
Display the Serial Port.
○ PLC Instrument
Display the time of air-bleeding.
○ About
Display the version information.
Phase-Neutral voltage meter.
Phase-Phase voltage meter.
Frequency meter.
Current meter.
No use.
Real power and load factor.
Total of real power and load factor.
Apparent power and load factor.
Total Apparent power and load factor.
Power factor and average of power factor.
Reactive power.
Total of reactive power.
Accumulation of real power/apparent power/reactive
power.
No use.
Ph-N voltage, frequency, voltage set in the Alt Config is
displayed.
No use.
No use.
No use.
No use.
13
Contents
Contents