Pcl Emulation - Oki ES3037 User Manual

Item
FONT SOURCE
FONT NO.
FONT PITCH
FONT HEIGHT

PCL emulation

The default settings are bold.
Value
Resident; DIMM0;
Downloaded
I000, C001, S001
0.44 cpi to 99.99 cpi in 0.01
cpi increments
Default = 10.00 cpi
4.00 to 999.75 point, in 0.25
point increments
Default = 12.00 point
ES 3037/3037e Setting up • 58
Description
Selects location of the PCL font
used.
DIMM0 is displayed only when
font DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been downloaded to the
printer.
Sets the PCL font number.
I = internal (resident font); I000 =
Courier.
C = Font stored in the printer's
Flash memory.
S = downloaded soft font, stored
on the printer's internal hard disk
drive. Applies only to printers with
a hard disk drive installed.
Sets the font width in characters
per inch. Only displayed if the font
is a fixed spacing outline font.
Sets the font point size. Applies
only to fixed fonts (does not apply
to proportional fonts).