5.
Place the appropriate self-adhesive tray number identifier
labels supplied with the High Capacity Feeder on the lower
rectangle at the right side of each tray.
6. Connect the printer interface cable and power cable, then
switch on the printer.
7. Print a MenuMap (see "Printing the MenuMap" on page 38)
and check that the newly added trays (Tray2, 3 and 4 if only
the HCF is installed, or Tray3, 4, and 5 if the optional tray is
also installed) appear under the MEDIA MENU.
c9_066.jpg
ES 3037/3037e Accessories • 236