Parallel Transmission Mode - Oki ES3037 User Manual

PARALLEL TRANSMISSION MODE

The parallel port supports IEEE-1284 and ECP mode. If your
computer's parallel port is not compatible with one of these modes,
the printer may not print at all or it may print corrupted data.
To correct for this, enter the printer's Parallel Menu and change the
ECP setting to Disable
Ready Ready
Attention Attention
1. Press the MENU button until
press the SELECT button.
2. Press the ITEM button until
3. Press the VALUE button to change the display to
4. Press the SELECT button.
An asterisk (*) appears to the right of the selected setting.
5. Press the ONLINE button to return the printer to online status.
control panel - language setup.eps
ES 3037/3037e Troubleshooting • 209
Menu Menu
Item Item
Online Online
PARALLEL MENU
is displayed.
ECP
Value Value Select Select
Cancel
is displayed, then
.
DISABLE