An Asterisk (*) Symbol Appears On The Display, Repeatedly Moving Across The First Line Then The Second; It Takes A Long Time To Start Printing - Oki ES3037 User Manual

An asterisk (*) symbol appears on the display, repeatedly
moving across the first line then the second.
Possible cause
The main board is not
properly seated in the
printer.

It takes a long time to start printing.

Possible cause
The printer has to warm up returning
from power save mode.
The image drum carries out a
cleaning process to ensure print
quality, which takes time.
The fuser unit adjusts temperature,
which takes time.
The printer is processing data from
another interface.
Remedy
Turn the printer off, then reseat the main board and turn
the printer back on again.
Remedy
In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode.
Wait until this process has been completed.
Wait until this process has been completed.
Wait until this data is processed.
ES 3037/3037e Troubleshooting • 216
zmother board remove.eps