Functional Test Of C-Arm Lift Movement And Parking Brakes - Siemens ARCADIS Varic Start-Up

22

Functional test of C-arm lift movement and parking brakes

Fig. 4:
•
Switch on the main system (C-arm).
•
To move the C-arm downward, press the downward button.
•
The lifting column moves to position 1
ly. A stop signal (3 beeps) sounds simultaneously.
•
To lower the lifting column further, press the downward button once again.
•
The lifting column can then be moved by a further 5 cm to the lowest point, position 2
(2/Fig. 4 / p.
downward button is pressed.
•
To move the C-arm upward, press the upward button. No signal sounds in this case.
•
The lift motor remains stationary if both buttons are pressed simultaneously.
•
Loosen the different parking brakes and apply them again. Secure blocking of the rele-
vant movement must be assured.
•
Document the function of the C-arm movements, brakes and warning signals in the test
protocol, "C-arm movement and emergency stop"
stop / p.
ARCADIS Varic
C-arm movement functional test
22). In this area a signal (3 beeps) sounds for safety reasons each time the
40).
SPR2-310.815.01.05.02
02.05
General Start-up
(1/Fig. 4 / p. 22) and remains there automatical-
(C-arm movement and emergency
Page 22 of 48
CS SD 24
0
Siemens AG
Medical Solutions