General Start-up
ber 1990 (e.g. Bender tester)
Fig. 3:
•
Measurement configuration according to
(1/Fig. 3 / p. 17)
•
For safety reasons place the system on an insulated base.
•
Perform measurement and repeat measurements.
•
Document the measured values in the "Leakage current test protocol"
rent measurement / p.
Siemens AG
Medical Solutions
Measuring circuit for the direct measurement of the system leakage current
is not available in ARCADIS Varic.
41).
SPR2-310.815.01.05.02
02.05
(Fig. 2 / p. 16)
application part
Page 17 of 48
CS SD 24
17
0
(Leakage cur-
ARCADIS Varic