Table of Contents
Advertisement
44 | Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode)
6. Press the up/down key to select the desired maximum density setting for
this modality.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Controlling the printer via a remote PC (with browser)
Accessing the Change settings menu
Removing a modality
Adding a modality
2830F EN 20210520 0952
on page 23
on page 34
on page 34
on page 80
Advertisement
Table of Contents
