Table of Contents
Advertisement
Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode) | 33
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
on page 12
Changing the router IP address
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
2. On the 'Network (DICOM)' screen, press the Down key five times, followed
by the Confirm key to select 'Router IP address'.
The 'Router IP address' screen is displayed:
120.120.120.120
If the router IP address has already been assigned, it will be shown on the
120.120.120.120
display.
3. Enter the router IP address by means of the arrow keys.
Example 1: if the IP address is 120.000.120.120, then the data entry
should be as follows:
120.000.120.120
120.000.120.120
Example 2: if the IP address is 120.0.120.120, then the data entry should
be as follows:
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
on page 23
Note: Note that blank spaces will be ignored (see example).
2830F EN 20210520 0952
Advertisement
Table of Contents
