Network Only Save Configuration Procedure - AGFA Drystar AXYS Reference Manual

Network only save configuration procedure

1. On the Save configuration menu, press the Down key, followed by the
Confirm key to select 'Network only'.
The following screen appears:
2. Press the Confirm key to confirm the network name.
The network settings are temporary saved on the internal media.
When 100% is reached, the following 'Save network' screen is displayed
and the printer will ask you to insert a USB flash drive:
3. Insert a USB flash drive.
The printer saves the network settings on the external USB flash drive:
C <path><filename>
A <path><filename>
When the writing of the save set is finished, the printer will ask you to
remove the USB flash drive:
4. Remove the USB flash drive.
As soon as the USB flash drive has been removed, the following screen is
displayed:
Drystar AXYS | Advanced Operation (key-operator mode) | 53
Note: A blank network name or a network name with
spacings is not allowed.
2853E EN 20210520 0952