AGFA Drystar AXYS Reference Manual page 31

If the Domain name has already been assigned, it will be shown on the
display.
3. Enter the domain name by means of the arrow keys.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry on page 12
Changing the printer IP address
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
2. On the 'Network (DICOM)' screen, press the Down key three times,
followed by the Confirm key to select 'Printer IP-Address'.
The 'Printer IP address' screen is displayed:
If the IP address has already been assigned, it will be shown on the display.
3. Press the up/down arrow keys to increment/decrement the numbers.
Press the left/right arrow keys to move through the fields. Press the
Confirm key to store the data.
Example 1: if the IP address is 120.000.120.120, then the data entry
should be as follows:
Drystar AXYS | Advanced Operation (key-operator mode) | 31
on page 23
Note: When no DHCP server is available and when the IP
address of the printer has never been set, the printer IP
address will be set to the APIPA address 169.254.10.10.
Note: Note that blank spaces will be ignored (see examples
on next page).
2853E EN 20210520 0952