AGFA Drystar AXYS Reference Manual page 79

Note: You can find the film type on the film packaging.
Note: Mammography film types are only shown in the list
when the option for the mammography application is
activated.
10. Press the up/down key to select the preferred film type for this modality.
If the current film type in the trays does not match the selected film type,
the following message is displayed:
\Modality name>
AVAILABLE IN INPUT
TRAY Use the
selected film type?
YES(v)
11. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
A screen summarizing the information you have entered will appear:
CTscanner
Brand name:
Philips
Modality type:
MXVIEW
Modality AE-title:
AE 0123456
Preferred film type:
FILM
--------------------
x Repeat step 2
v Go to step 3
The data entry for the new modality is now finished.
12. Press the Confirm key to continue the installation wizard or press the
Escape key to repeat step 2.
When you have pressed the Confirm key, the printer will ask you if you
want to add another modality:
• If you wish to add another modality, press the Confirm key (YES). You
will be taken back to step 2 to repeat the procedure.
• If you do not wish to add another modality, press the Escape key (NO).
The following screen will appear:
Drystar AXYS | Advanced Operation (key-operator mode) | 79
NO(x)
2853E EN 20210520 0952