AGFA Drystar AXYS Reference Manual page 75

2. Press the Confirm key to continue.
The 'Printer IP address' screen is displayed:
If the IP address has already been assigned, it will be shown on the display.
Note: When no DHCP server is available and when the IP
address of the printer has never been set, the printer IP
address will be set to the APIPA address 169.254.10.10.
3. Press the up/down arrow keys to increment/decrement the numbers.
Press the left/right arrow keys to move through the fields. Press the
Confirm key to store the data.
Note: Note that blank spaces will be ignored (see examples
below).
Example 1: if the IP address is 120.000.120.120, then the data entry
should be as follows:
Example 2: if the IP address is 120.0.120.120, then the data entry should
be as follows:
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Netmask' screen is displayed:
250.250.250.250
If the netmask has already been assigned, it will be shown on the display.
Note: When no DHCP server is available and when the
subnet mask of the printer has never been set, the printer
subnet mask will be set to the APIPA address 255.255.0.0.
5. Enter the netmask by means of the arrow keys.
250.250.250. 0
Drystar AXYS | Advanced Operation (key-operator mode) | 75
2853E EN 20210520 0952