AGFA Drystar AXYS Reference Manual page 80

80 | Drystar AXYS | Advanced Operation (key-operator mode)
13. Press the Confirm key to continue.
Related Links
Data entry
Saving the configuration
1. The printer settings are saved automatically to the internal media.
When 100% is reached, the following 'Save configuration' screen will ask
you to insert the back-up USB flash drive:
2. Insert a USB flash drive.
As soon as the USB flash drive is inserted, the 'Copy' screen is displayed.
C <path><filename>
A <path><filename>
The printer saves the configuration on the external USB flash drive
When the writing of the save set is finished, the printer will ask you to
remove the USB flash drive:
3. Remove the USB flash drive.
As soon as the USB flash drive has been removed, the following screen is
displayed:
4. Label the USB flash drive with the BAC_<save_set_name> and press the
Confirm key.
The installation is now finished, and the following screen is displayed:
2853E EN 20210520 0952
on page 12
WARNING:
You need to complete this step, otherwise all the install data you
have entered will be lost!
Note: The <save set name > is preceded by the characters
"BAC". BAC stands for General backup.