AGFA Drystar AXYS Reference Manual page 76

76 | Drystar AXYS | Advanced Operation (key-operator mode)
Example: if the netmask is 250.250.250.0, then the data entry should be
as follows:
6. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Router IP address' screen is displayed:
If the Router IP address has already been assigned, it will be shown on the
display.
7. Enter the Router IP address by means of the arrow keys.
Example 1: if the IP address is 120.000.120.120, then the data entry
should be as follows:
Example 2: if the IP address is 120.0.120.120, then the data entry should
be as follows:
8. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Printer AE-title' screen is displayed:
If the Printer AE-title has already been assigned, it will be shown on the
display.
9. Change the Printer AE-title by means of the arrow keys. The Printer AE-
title is limited to 16 characters.
2853E EN 20210520 0952
Note: Note that blank spaces will be ignored (see examples
below).
250.250.250. 0
120.120.120.120
Note: Note that blank spaces will be ignored (see examples
below).
120.000.120.120