Using The Cordless Devices Application; Viewing Cordless Module Information; Low Battery Level; Auto Dial - Mitel 5330 User Manual

Mitel 5330/5340 IP Phones – User Guide

Using the Cordless Devices Application

The Cordless Devices Application provides access to module information and pairing for hand- or
headsets.
To access the Cordless Devices Application, do one of the following:
•
Press Applications and then press Cordless Devices
•
Press a feature key you have programmed as the Cordless Devices Application key.
For information about programming feature keys, refer to
on page 13.
Note: When the pairing button on the Cordless Module is pressed, or when the battery level of a
cordless accessory is critically low, the phone will automatically open the Cordless Devices
Application.

Viewing Cordless Module Information

You can use the Cordless Module Application to view protocol, firmware, and hardware
information about the module.
To view cordless module information
1. Access the Cordless Module Application.
2. Press Cordless Module Info. Device information appears on the screen.
3. Press Close to exit.

Low Battery Level

When the battery of a cordless device reaches a near-critical level, the phone displays a warning.
Until the battery is recharged (or until it becomes fully discharged), the warning is repeated at
each new call made using the Prime Line. To continue with a call while charging the cordless
accessory, switch to speakerphone and then cradle the cordless accessory.

Auto Dial

When a Cordless Module is installed and at least one device is paired, the Auto Dial feature is
available in the Settings menu. You can program a number that is automatically dialed when a
cordless device hookswitch button is pressed.
To program an Auto Dial number:
1. Press Settings or
2. Press Auto Dial, and then press Edit Number.
3. Using the dial pad
4. Press Save.
5. Press Edit Label.
6. Using the dial pad
7. Press Save and then press Close.
46
.
or the onscreen keyboard, enter the auto dial number.
or the onscreen keyboard, enter the label.
Programming Features On Your Keys