Dialing - Auto Dial Enabled; Using The Cordless Devices Application; Low Battery Level; Viewing Cordless Module Information - Mitel 5330e User Manual

5330e/5340e IP Phones – User Guide
Dialing – Auto Dial Enabled
To dial a number with Auto Dial enabled:

To dial the predefined Auto Dial number, press the hookswitch button on the headset.
To program Auto Dial, refer to

USING THE CORDLESS DEVICES APPLICATION

The Cordless Devices Application provides access to module information and pairing for
hand- or headsets.
To access the Cordless Devices Application, do one of the following:

Press the blue Applications

Press a feature key you have programmed as the Cordless Devices Application key.
Note: When the pairing button on the Cordless Module is pressed, or when the battery
level of a Mitel-branded cordless accessory is critically low, the phone will automatically
open the Cordless Devices Application.

Low Battery Level

When the battery of a Mitel cordless device reaches a near-critical level, the phone displays a
warning. Until the battery is recharged (or until it becomes fully discharged), the warning is
repeated at each new call made using the Prime Line. To continue with a call while charging
the cordless accessory, switch to speakerphone and then cradle the cordless accessory.

Viewing Cordless Module Information

You can use the Cordless Devices Application to view protocol, firmware, and hardware
information about the Cordless Module attached to your phone.
To view Cordless Module information:
1. Access the Cordless Devices Application.
2. Press Cordless Module Info or Bluetooth Module Info. Device information appears on
the screen.
3. Press Close to exit.
Auto Dial on page 86.
key, and then press Cordless Devices.
- 84 -