Table of Contents
Advertisement
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first unplug the power adapter.
Next, remove
the Row Bar (19)
from the Row
Bar Hook (88).
Then, remove the
two M4 x 16mm
Screws (107)
from the Flywheel
Cover (86). Pivot
the Flywheel
Cover upward and
remove it from the
rower.
107
86
19
88
26
Locate the Reed
Switch (67). Turn
the Flywheel
(60) until a
Flywheel Magnet
(135) is aligned
with the Reed
Switch. Then,
slightly loosen
the two indicated
M4 x 16mm
Screws (107),
slide the Reed
Switch slightly closer to or away from the Flywheel
Magnet, and then retighten the Screws.
Plug in the power adapter, and then turn the
Flywheel (60) so that the Flywheel Magnet (135)
passes the Reed Switch (67) repeatedly. Repeat the
actions described above until the console displays cor-
rect feedback.
When the reed switch is correctly adjusted, reattach
the parts that you removed and plug in the power
adapter.
60
67
135
107
Advertisement
Table of Contents
