Table of Contents
Advertisement
10. Tip: Place some of the packing material
under the Rear Stabilizer (5) to raise it.
Orient the Rear Rail Bumper (38) as shown, and
press it into the Rail (2).
Next, orient the Rail End Cover (74) as shown
and attach it and the Rear Rail Bumper (38) to
the Rail (2) with an M4 x 16mm Screw (107).
Then, attach the Rail End Cover (74) to the
Right and Left Rail Shields (89, 90) with two
M4 x 16mm Screws (107).
Remove the packing material from beneath the
Rear Stabilizer (5).
11. IMPORTANT: Always plug the Power Adapter
(136) into the rower before you plug it into an
outlet.
Plug the Power Adapter (136) into the receptacle
on the front of the rower.
Note: To plug the Power Adapter (136) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 12.
IMPORTANT: Keep the included tools in a
secure location. You will need them for future
adjustment and maintenance of your rower.
12. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.
Place a mat under the rower to protect the floor.
10
107
38
74
107
11
11
2
90
89
5
136
Advertisement
Table of Contents
