Table of Contents
Advertisement
Technical data
12.2 Technical Specifications Compact FF Link (6ES7655-5BA00-0AB0)
12.1.7
Rated voltage
Rated voltage for operation
The described components work with a rated voltage of 24 V DC.
The tolerance range extends from 20.4 V DC to 28.8 V DC.
Exceptions
● Active field distributors:
For corresponding specifications, refer to Operating Instructions
Field Distributor, DP/PA Link and Y Link .
12.2
Technical Specifications Compact FF Link (6ES7655-5BA00-0AB0)
Dimension W x H x D (mm)
Weight
Transmission speed for the higher level DP master system 9.6; 19.2; 45.45; 93.75; 187.5; 500 kbps
Bus protocol
Frame length I / O data
Length of configuration frame
Length of diagnostic frame
Length of parameterization frame
suitable for plant changes in runtime
Transmission speed on FOUNDATION Fieldbus H1
Bus protocol
Degree of protection
Rated supply voltage
Power consumption (24 VDC)
● Polarity reversal protection
Electrical isolation
● FF for PROFIBUS DP
● DP master system for FOUNDATION Fieldbus
● FF / supply / DP
● All electric circuits / functional grounding
Insulation tested with
Output voltage for FF unit:
● Voltage monitoring
● Overvoltage monitoring
86
Dimensions and weight
40 x 125 x 130
Approx. 350 g
Module-specific data
1.5; 3; 6; 12 Mbps
PROFIBUS DP / FOUNDATION Fieldbus
H1
Max. 244 bytes
Max. 244 bytes
Max. 244 bytes
Max. 244 bytes
Yes
31.25 Kbps
FOUNDATION Fieldbus H1
IP 20 to IEC 60529
Voltages, currents, potentials
24 VDC (20.4 V to 28.8 V)
Max. 1.3 A
Yes
Yes
Yes
Yes
Yes
500 VDC
31 V DC ±1 V
15.5 V
U > 35 V; latching cutoff
Operating Instructions, 03/2015, A5E35651552-AA
DP/PA Coupler, Active
Compact FF Link
Advertisement
Table of Contents
