Maintenance; Installing A New Tape Roll - Pitney Bowes SendPro P Series User Manual

Installing a new tape roll

The mailing system uses gummed or adhesive tape. A red stripe appears along its edge
approximately 36 inches from the end to indicate a low tape condition. Replace the tape when the
stripe appears. You can install a new roll before the system actually runs out of tape.
Caution:
If you do not use Pitney Bowes supplied tape, you will not be able to determine
when the tape is running out and this may cause a jam. The red stripe on the tape
notifies you that you are running low on tape. There is also a black stripe that tells
the machine when it is out of tape. When the system detects the black stripe on the tape it stops
the machine. At this point there is still a small amount of tape on the roll.
1. Select Settings under Mailing on the Home screen.
2. Select Hardware.
3. Select Tape.
4. Select << Rewind to bring the tape back for removal.
5. Open the supplies cover.
Pitney Bowes User Guide April 2022

Maintenance

199